home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19980424-19980901
/
000002_news@newsmaster….columbia.edu _Fri Apr 24 18:51:08 1998.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Return-Path: <news@newsmaster.cc.columbia.edu>
Received: from newsmaster.cc.columbia.edu (newsmaster.cc.columbia.edu [128.59.35.30])
by watsun.cc.columbia.edu (8.8.5/8.8.5) with ESMTP id SAA23277
for <kermit.misc@watsun.cc.columbia.edu>; Fri, 24 Apr 1998 18:51:07 -0400 (EDT)
Received: (from news@localhost)
by newsmaster.cc.columbia.edu (8.8.5/8.8.5) id SAA03950
for kermit.misc@watsun; Fri, 24 Apr 1998 18:51:07 -0400 (EDT)
Path: news.columbia.edu!sol.ctr.columbia.edu!paralynx!news.mindlink.net!paralynx-2!paralynx!paralynx-4!van-bc!nntp.portal.ca!nntp.cs.ubc.ca!news.Stanford.EDU!su-news-hub1.bbnplanet.com!news.bbnplanet.com!news.alt.net!inquo!vyzynz!not-for-mail
From: "lance wynn" <lancew@accessld.com>
Newsgroups: comp.protocols.kermit.misc
Subject: Direct Serial connection Problems
Date: Fri, 24 Apr 1998 16:35:41 -0600
Organization: Vyzynz
Lines: 15
Message-ID: <6hr4fd$qvh$1@nebo.vii.com>
NNTP-Posting-Host: sparky.accessld.com
X-Newsreader: Microsoft Outlook Express 4.71.1712.3
X-MimeOLE: Produced By Microsoft MimeOLE V4.71.1712.3
Xref: news.columbia.edu comp.protocols.kermit.misc:8649
I am trying to use kermit as a bridge into a telephone switch, Till now i
have used a direct serial connection with hyperterminal. I am attempting to
setup a reliable way to telnet into an NT machine, and establish a serial
connection to the switch, the phone switch does not disconnect the session,
there is no flow control on the switch, and no carrier detect.
My problem is that if the machine gets restarted, the ports become
unaccessable to k95, ie: on connect, I am unable to see a prompt, and
disconnect time takes up to several minutes to exit kermit, or does not exit
at all. This problem can be rectified if before I use kermit I first open
the port in Hyperterminal on the server after this I can use k95 with no
problem. Is there some sort of initialization command that I don't Know
about? Please help.